Exablaze is now part of Cisco.


Exablaze offers world-class timestamping and network-to-disk capture solutions built using our full suite of components. The ExaLINK Fusion HPT offers deep-buffered tap/aggregation facilities with high precision timestamps while all ExaNIC network adapters offer line-rate packet streaming to memory. Our Exact-Capture packet capture software, combined with the ExaDISK network capture NVMe SSD drive completes this solution.

The ExaLINK Fusion HPT offers 1G/10G/40G Ethernet packet tap and aggregation, with 32GB deep packet buffers. It features High Precision Timestamping technology with 70ps (0.07ns) precision.

Read more about the Fusion HPT...

Exact Capture is a high rate packet capture system for ExaNIC devices. It enables sustained capture at rates up to 25Gb/s as while maintaining access to pico-second precision timestamps.

Read more about the Exact Capture...

The ExaDISK FX1 is an 8TB NVMe SSD storage device, featuring a unique quad-controller architecture optimized for network packet capture at sustained rates of over 6GB/s (48Gb/s).

Read more about the ExaDISK FX1...


For space constrained environments, the ExaNIC HPT offers 2x10GbE ports, each with 0.25ns (250ps) timestamping precision. The device is capable of performing line-rate capture to disk on both ports simultaneously. It also operates as ultra-low latency network adapter and ships with a userspace networking API for low latency packet manipulation, and an in-place sockets acceleration library to accelerate unmodified applications.

All ExaLINK Fusion switches can be extended with a built-in x86 CPU module, providing high-rate capture capabilities directly inside the switch. The module features a quad core Intel i7 Skylake processor with turbo boost up to 3.5Ghz, two mSata bays and one m.2 drive bay with capacity for up to 2TB of SSD based storage. The module also features a complete ExaNIC X40 network adapter on board for 8x 1/10G or 2x 40G network capabilities.


Exablaze offers more than just network capture. We build and supply an entire ecosystem of network products including low latency switches, low latency NICs, optics and cables. Everything needed to build a high performance, low latency network system is available from Exablaze. Here's a few examples:

ExaLINK switches from Exablaze are the lowest latency network switches on the market. The devices include a high density layer 1 (L1) matrix switching, ultra-low latency aggregation, and complete layer 2 (L2) switching. A switch form factor FPGA application platform is also available.

ExaNIC network adapters are the lowest latency, most feature packed network interfaces on the market. The ExaNIC X25 device offers trigger to response times of under 600ns. Meanwhile the ExaNIC HPT offers 0.25ns (250ps) resolution measurement and the ExaNIC GM is a GPS synchronized PTP Grandmaster. All ExaNIC devices operate with libexanic and ExaSOCK , our free and open source software libraries.

All ExaNICs are FPGA based. This makes them fast, flexible, and field upgradable. Users can also implement custom network processing applications on many ExaNIC devices using the ExaNIC Firmware Development Kit (FDK) for these devices. Large FPGA devices are also available including the ExaNIC V5P and ExaNIC V9P .

Exablaze supplies high quality SFP+ and QSFP optical transceivers . Transceivers are available in short and long range variants for 1G, 10G and 40G speeds. Note: Exablaze does not require that customers use our branded transceivers. We try to remain compatible with all reasonable quality 3rd party SFP+/QSFP transceivers on the market.

Exablaze supplies high quality direct attach (twinax) cables in a variety of lengths and connector options. We can provide SFP+ to SFP+, QSFP to QSFP, and QSFP to SFP+ breakout cables. Note: Exablaze does not require that customers use our branded twinax cables. We try to remain compatible with all reasonable quality 3rd party cables on the market.


Speak to any one of our global network of resellers and distributors or contact us directly.